ELECTRONIC SPECIFICATIONS
Power Output per Channel: 200 Watts
Number of Channels: 2
Speaker Impedance: 2, 4, or 8 Ohms
Rated Power Band: 20Hz to 20kHz
Total Harmonic Distortion: 0.005%
Dynamic Headroom: 2dB
Frequency Response +0,-0.5dB: 20Hz to 20kHz
Frequency Response, +0, -3dB: 10Hz to 100kHz
Sensitivity Phono (Moving Coil): 0.25mV
Sensitivity Phono (Moving Magnet): 2.5mV
Sensitivity High Level (Balanced / Unbalanced): 0.5V/0.25V
Sensitivity (Power Amp input): 1.4V
Signal To Noise Ratio (Moving Coil): 80dB
Signal To Noise Ratio (Moving Magnet): 82dB
Signal To Noise Ratio (High Level): 95dB
Signal To Noise Ratio (Power Amp input): 113dB
Input Impedance (Balanced / Unbalanced): 20K/20K
Damping Factor: >40
Maximum Output (Balanced / Unbalanced): 8V Unbalanced
CONNECTIVITY
Balanced Input: 1
Unbalanced Input: 5
Phono Input Moving Coil: 1 (adjustable loading)
Phono Input Moving Magnet: 1 (fixed loading)
Upgradeable Digital Audio Module: Yes: DA1
Digital Coaxial Input: 2
Digital Optical Input: 2
Digital MCT Input: 1
Digital USB Input: 1
Balanced Variable Output: 0
Unbalanced Fixed Output: 0
Unbalanced Variable Output: 2
Headphone Output: 1/4" High Drive with Headphone Crossfeed Director (HXD®)
AM/FM Tuner option: Included
Home Theater PassThru: Yes
Unbalanced Analog Connector Type: Standard
Speaker Binding Post Type: Standard
Service Port: 1
DIGITAL AUDIO SPECIFICATIONS
Digital-to-Analog Converter (DAC) Type: 8-channel, 32-bit/384kHz PCM/DSD, Quad Balanced
Digital Coaxial Input Sample Rate: 24-bit/44.1kHz to 192kHz
Digital Optical Input Sample Rate: 24-bit/44.1kHz to 192kHz
Digital MCT Input Sample Rate: 16-bit/44.1kHz (CD), DSD64 (SACD)
Digital USB Input Sample Rate: 32-bit/44.1kHz to 384kHz (PCM)
DSD64, DSD128, DSD256, DXD352.8kHz, DXD384kHz
FM SPECIFICATIONS
Tuning Range: 87.9MHz - 107.9MHz (USA)
87.5MHz - 108.0MHz (Europe)
76MHz - 90MHz (Japan)
Channel Spacing: 200kHz (USA)
50kHz (Europe50)
100kHz (Europe100, Japan)
Antenna Input: 75 ohms, Type “F” Coax connector
FM ANALOG SPECIFICATIONS
Useable Sensitivity: 2.2uV (18.1dBf)
50dB Quieting Sensitivity: 1.5uV (14.8dBf)
Signal To Noise Ratio: Mono: 70dB Stereo: 68dB
Frequency Response: ±1dB 20Hz to 15,000Hz
Total Harmonic Distortion: Mono: 0.4% Stereo: 0.8%
Channel Selectivity: 60dB Adjacent Channel, 66dB Alternate Channel
Stereo Separation: 38dB
AM SPECIFICATIONS
Tuning Range: 530kHz - 1720kHz (USA), 522kHz - 1602kHz (Europe), 522kHz - 1611kHz (Japan)
Channel Spacing:10kHz (USA), 9kHz (Europe, Japan)
Antenna Input: Balanced, RJ45 connector (for use only with supplied McIntosh RAA2 Remote AM Antenna)
AM ANALOG SPECIFICATIONS
Selectivity: 45dB Adjacent Channel
Signal To Noise Ratio: 50dB
Frequency Response: 0dB, -6dB 50Hz to 3,000Hz
Total Harmonic Distortion: 0.5%
Sensitivity: 350uV/m
CONTROL
Tone Controls: Bass and Treble
Tone Bypass and Input Assign: Yes
RS232 Control Input: Yes
Power Control Output: 1 Main, 2 Trigger
Rear Panel Data Port: 4
Rear Panel IR Sensor Input: Yes
Input Level Match: Yes
GENERAL SPECIFICATIONS
Vacuum Tube or Solid State: Solid State
Output Type: Autoformer™
Output Meters: Yes
Dual Layer Chassis: Yes
Chassis Finish: Black painted steel
McIntosh Monogrammed Heatsinks™: Yes
Power Requirement: 120V 50/60Hz, 4.4 amps
Standby Power Requirement: <0.25 Watts
WEIGHTS & DIMENSIONS
Unit Dimensions (W x H x D): 17-1/2" (44.5cm) x 7-5/8" (19.4cm) x 18-3/4" (47.6cm)
Unit Weight: 75 lbs (34.1 kg)
Shipping Weight: 93 lbs (42.3 kg)