Miyajima Laboratory EC-5

This pre-amp wires signal system with a single wire.
The power supply-related cable is far from the signal system.
In addition, this pre-amp secures enough voltage by a chalk transformer effectively.

I was able to isolate correspondence from the noise of the power supply enough by easy space.
The sound quality has transparency / strength / stability.
This pre-amp drives various power amp by a mode switch ideally.
 
The phonoinput of 3 circuits supports plural players.
About an upper switch, the change of RIAA curve and the 78rpm curve is possible.
The LP which is not RIAA of Colombian blue label / Victor LM series /etc of the initial LP recommends a position of 78rpm.
The input impedance of A is standard 47kΩ.
B and C can change impedance freely each.
 
The right photograph is a changeover switch of the input impedance of B and C.
B : 600～47kΩ　C : 600～100kΩ
An impedance matching improves by matching the impedance of the pre-amp to the impedance of a cartridge and the stepup transformer.
When impedance is unclear, please choose 47kΩ.
 
The MODE switch is convenient.
There are the output of the single channel and the output of the LR reverse.
- 10dB is one-third of normal volume.
- 26dB is 1/21 of the normal volume.
The gain adjustment can fine-tune the volume and is useful as a mute switch.
 
Please change the input of 6 circuits by SELECTOR.
PHONO is divided into 3 circuits more by PHONO SW.
 
Please use DIRECT of OUTPUT for normal power amp.
Please use VOLUME OUTPUT for the power amp of the high gain.
The user is not troubled with the difference in gain of the power amp by controlling a gain by the subvolume.