top of page
McIntosh MT2 framsida

McIntosh MT2 Precision Turntable

The McIntosh MT2 Precision Turntable combines the latest in turntable technology and design to deliver both superb performance and accurate playback. The MT2 is a great way to upgrade your home audio system to play vinyl albums. A full complement of features allows for all recordings to be reproduced with flawless realism. Its advanced electronic and mechanical design will give you many years of smooth, trouble-free operation. A subtle green glow emanates from under the platter and the outside edges of the plinth for a touch of refined ambiance.

 

The MT2 plays both 33-1/3 and 45 rpm records. It’s virtually ready to use out of the box with just a few setup steps to complete and then you’ll be enjoying your vinyl in no time.

 

The MT2 comes with a Sumiko Moonstone cartridge, a next-gen moving magnet phono pickup. The Moonstone phono cartridge is dressed to impress. It has low moving-mass and output, and is topped off with their listen-tested 0.3 x 0.7 mil elliptical diamond. Moonstone transcribes sonic imagery with weight, richness, depth, and keenly realistic texture. The sonic image is suspended and well-controlled over a nearly-absent noise floor, providing fantastic clarity without etch nor confusion.

 

The tonearm is constructed from dural-aluminum with special damping materials and is light weight yet highly rigid. The noise free vertical bearings feature two precision ceramic surfaces with damping fluid; the horizontal bearing is a gimballed sapphire design.

 

The belt driven, solid black outer platter is made from a special dynamically balanced polyoxymethylene (POM) and is over 1” thick. This heftiness helps to both resist and absorb external vibrations that can cause noise during playback; its large mass also provides the perfect flywheel action for stable playback speed. The inner platter is made of CNC-precision milled aluminum. The platters rotate on a polished and tempered steel shaft in a sintered bronze bushing.

 

The DC motor is driven by an external voltage-stabilized power supply and is completely decoupled from the chassis, isolating your records from any mechanical interference. Its sturdy plinth has a resonance optimized and highly compressed wood base with black lacquer finish, while the top and middle acrylic plates help absorb unwanted vibrations.

A clear, contoured dust cover is included. The MT2 turntable is compatible with a variety of McIntosh phono preamplifiers, stereo preamplifiers, integrated amplifiers and home theater processors with phono inputs; virtually any of our amplifiers and speakers can be used to complete your audio system.

 

  • The McIntosh MT2 Precision Turntable combines the latest in turntable technology and design to deliver both superb performance and accurate playback.
  • Its advanced electronic and mechanical design will give you many years of smooth, trouble-free operation.
  • Virtually ready to use out of the box as tracking force, anti-skate force, cartridge overhang and arm height are all preset from the factory for maximum performance. The remaining setup steps are simple and you’ll be enjoying your vinyl in no time.
  • Comes with a Sumiko Moonstone cartridge, a next-gen moving magnet phono cartridge that transcribes sonic imagery with weight, richness, depth, and keenly realistic texture.
  • The DC motor is driven by an external voltage-stabilized power supply and is completely decoupled from the chassis, isolating your records from any mechanical interference.
  • Sturdy plinth has a resonance optimized and highly compressed wood base with black lacquer finish, while the top and middle acrylic plates help absorb unwanted vibrations.
  • A subtle green glow emanates from under the platter and the outside edges of the plinth for a touch of refined ambiance.

 
  • CARTRIDGE SPECIFICATIONS

    Cartridge Type: Moving Magnet

    Output Level: 3.0 mV at 5 cm/s

    Load Impedance: 47K Ohms recommended (Preamp MM Input)

    Frequency Response: 12Hz to 33kHz

    Channel Separation: 30dB at 1kHz

    Compliance: 12 x 10-6 cm/dyne

    Recommended Tracking Force: 2.0 g

    Channel Difference: 0.5dB at 1kHz

    Total Mass: 6.5 g

    Stylus: Elliptical Diamond

    Cantilever Material: Aluminum

     

    TONEARM SPECIFICATIONS

    Bearing: Sapphire and Ceramic

    Arm Tube: Dural-Aluminum

    Counterweight: Eccentric

    Adjustments: Vertical Tracking Angle, Antiskate, Azimuth

     

    TURNTABLE SPECIFICATIONS

    Playback Speeds: 33-1/3 and 45 rpm

    Motor Type: DC Motor with Stainless Steel Brushes

    Speed Control: Servo System

    Platter: Dynamically balanced polyoxymethylene (POM)

    Platter Bearing: Polished and tempered steel shaft in sintered bronze bushings

    Signal To Noise Ratio: 35dB - 40dB

    Wow & Flutter: 0.15% - 0.25%

     

    CONNECTIVITY

    Stereo Outputs Unbalanced: 1

     

    CONTROL

    Power Control Input: 0

    Power Control Output: 0

    Platter Light: N/A

    Speed Control Fine Adjustment: Yes

     

    GENERAL SPECIFICATIONS

    Dust Cover Included: Yes

     

    WEIGHTS & DIMENSIONS

    Unit Dimensions (W x H x D): 17-13/16" (45.2cm) x 5" (12.7cm) (6" (15.2cm) with dust cover) x 17" (43.2cm)

    Note: Tone Arm Height will vary depending on the type of Cartridge installed.

    Unit Weight: 29 lbs (13.2 kg)

    Shipping Weight: 39 lbs (17.6 kg)

75 900,00 krPris
Moms ingår |

Fler Produkter

bottom of page