McIntosh MAC7200 2-Channel Receiver
With 200 Watts per channel, 14 inputs and a highperformance AM/FM tuner, the MAC7200 Stereo Receiver is a music lover’s dream.
Built-in AM/FM tuner will pick up your favorite radio stations with unparalleled clarity and a realism that is free from noise and distortion.
All digital inputs are housed in the DA1 Digital Audio Module. The DA1 can be replaced by future modules to easily keep the MAC7200 current with all the latest digital audio technologies.Supports high resolution digital music up to DSD256 and DXD 384kHz via an 8-channel, 32-bit/192kHz DAC used in Quad Balanced mode.
Features our new McIntosh Monogrammed Heatsinks™ that are so efficient at dissipating heat that they warrant bearing the McIntosh “Mc” logo.Utilizes new, more powerful control microprocessors and some of the latest audio-grade circuit components.
Full of numerous McIntosh technologies including Autoformers, Power Guard®, Sentry Monitor™, Home Theater PassThru, High Drive headphone amplifier with Headphone Crossfeed Director (HXD®) and Power Control.
ELECTRONIC SPECIFICATIONS
Power Output per Channel: 200 Watts
Number of Channels: 2
Speaker Impedance: 2, 4, or 8 Ohms
Rated Power Band: 20Hz to 20kHz
Total Harmonic Distortion: 0.005%
Dynamic Headroom: 2dB
Frequency Response +0,-0.5dB: 20Hz to 20kHz
Frequency Response, +0, -3dB: 10Hz to 100kHz
Sensitivity Phono (Moving Coil): 0.25mV
Sensitivity Phono (Moving Magnet): 2.5mV
Sensitivity High Level (Balanced / Unbalanced): 0.5V/0.25V
Sensitivity (Power Amp input): 1.4V
Signal To Noise Ratio (Moving Coil): 80dB
Signal To Noise Ratio (Moving Magnet): 82dB
Signal To Noise Ratio (High Level): 95dB
Signal To Noise Ratio (Power Amp input): 113dB
Input Impedance (Balanced / Unbalanced): 20K/20K
Damping Factor: >40
Maximum Output (Balanced / Unbalanced): 8V Unbalanced
CONNECTIVITY
Balanced Input: 1
Unbalanced Input: 5
Phono Input Moving Coil: 1 (adjustable loading)
Phono Input Moving Magnet: 1 (fixed loading)
Upgradeable Digital Audio Module: Yes: DA1
Digital Coaxial Input: 2
Digital Optical Input: 2
Digital MCT Input: 1
Digital USB Input: 1
Balanced Variable Output: 0
Unbalanced Fixed Output: 0
Unbalanced Variable Output: 2
Headphone Output: 1/4" High Drive with Headphone Crossfeed Director (HXD®)
AM/FM Tuner option: Included
Home Theater PassThru: Yes
Unbalanced Analog Connector Type: Standard
Speaker Binding Post Type: Standard
Service Port: 1
DIGITAL AUDIO SPECIFICATIONS
Digital-to-Analog Converter (DAC) Type: 8-channel, 32-bit/384kHz PCM/DSD, Quad Balanced
Digital Coaxial Input Sample Rate: 24-bit/44.1kHz to 192kHz
Digital Optical Input Sample Rate: 24-bit/44.1kHz to 192kHz
Digital MCT Input Sample Rate: 16-bit/44.1kHz (CD), DSD64 (SACD)
Digital USB Input Sample Rate: 32-bit/44.1kHz to 384kHz (PCM)
DSD64, DSD128, DSD256, DXD352.8kHz, DXD384kHz
FM SPECIFICATIONS
Tuning Range: 87.9MHz - 107.9MHz (USA)
87.5MHz - 108.0MHz (Europe)
76MHz - 90MHz (Japan)
Channel Spacing: 200kHz (USA)
50kHz (Europe50)
100kHz (Europe100, Japan)
Antenna Input: 75 ohms, Type “F” Coax connector
FM ANALOG SPECIFICATIONS
Useable Sensitivity: 2.2uV (18.1dBf)
50dB Quieting Sensitivity: 1.5uV (14.8dBf)
Signal To Noise Ratio: Mono: 70dB Stereo: 68dB
Frequency Response: ±1dB 20Hz to 15,000Hz
Total Harmonic Distortion: Mono: 0.4% Stereo: 0.8%
Channel Selectivity: 60dB Adjacent Channel, 66dB Alternate Channel
Stereo Separation: 38dB
AM SPECIFICATIONS
Tuning Range: 530kHz - 1720kHz (USA), 522kHz - 1602kHz (Europe), 522kHz - 1611kHz (Japan)
Channel Spacing:10kHz (USA), 9kHz (Europe, Japan)
Antenna Input: Balanced, RJ45 connector (for use only with supplied McIntosh RAA2 Remote AM Antenna)
AM ANALOG SPECIFICATIONS
Selectivity: 45dB Adjacent Channel
Signal To Noise Ratio: 50dB
Frequency Response: 0dB, -6dB 50Hz to 3,000Hz
Total Harmonic Distortion: 0.5%
Sensitivity: 350uV/m
CONTROL
Tone Controls: Bass and Treble
Tone Bypass and Input Assign: Yes
RS232 Control Input: Yes
Power Control Output: 1 Main, 2 Trigger
Rear Panel Data Port: 4
Rear Panel IR Sensor Input: Yes
Input Level Match: Yes
GENERAL SPECIFICATIONS
Vacuum Tube or Solid State: Solid State
Output Type: Autoformer™
Output Meters: Yes
Dual Layer Chassis: Yes
Chassis Finish: Black painted steel
McIntosh Monogrammed Heatsinks™: Yes
Power Requirement: 120V 50/60Hz, 4.4 amps
Standby Power Requirement: <0.25 Watts
WEIGHTS & DIMENSIONS
Unit Dimensions (W x H x D): 17-1/2" (44.5cm) x 7-5/8" (19.4cm) x 18-3/4" (47.6cm)
Unit Weight: 75 lbs (34.1 kg)
Shipping Weight: 93 lbs (42.3 kg)